UJI4D: This Electronics-related Article is a Stub

UJI4D Twin tail A twin tail, also called an H-tail, consists of two small vertical stabilisers on either side of the horizontal stabiliser. Structurally, the empennage consists of the entire tail assembly, including the tailfin, the tailplane and the part of the fuselage to which these are attached. Location of tailplane - mounted high, mid or low on the fuselage, fin or tail booms. Aircraft empennage designs may be classified broadly according to the fin and tailplane configurations. Heavier-than-air aircraft without any kind of empennage (such as the Northrop B-2) are rare, and generally use specially shaped airfoils whose trailing edge provide pitch stability, and rearwards swept wings, often with dihedral to provide the necessary yaw stability. T-tails also tend to have a larger radar cross section. A V-tail may also have a smaller radar signature. Reichmann, Helmet: Flying Sailplanes, p.|{3|4|5|6|7|8|9|10|Three|Four|Five|Six|Seven|Eight|Nine|Ten} Mistakes In Slot Liverpool That Make You Look Dumb