SOHIB88: In the Bluetooth Settings

SOHIB88 If you decide to mount the sounder outdoors, you must drill a hole through the wall for the wires. You should mount the fire sensor switches in the spots where you feel they will be most effective. You have just finished wiring the intruder-entry sensor switch loop. Close all the entry-detection switches by shutting all windows and doors in the loop. When you turn the key switch back on, the alarm should remain off until the loop circuit is again interrupted. At the key switch, cut the red wire, strip insulation from the ends, and fasten each cut end under a separate screw terminal on the switch.|Tahun Berikutnya, ia Berperan sebagai Dr